AnaSonde Software
Morse Code Software Dowloads
-
AnaSonde3MProgrammer1_1.exe
(597 KB) May 22, 2008
The AnaSonde-3M is fully customizable.
Use this software to program your AnaSonde-3M with channel types, custom
equations, custom callsigns, etc.
-
SondeWorks1_1.exe (882 KB) May 21, 2008
-
Version 1.1 has been created to work with the AnaSonde-3M in radio transmission mode.
-
SondeWorks1 graphically displays data received from a Morse
Code AnaSonde in real time. The user can choose between
3 different graph types on the fly. Clicking on a graph
or series definition allows the user to change parameters at any time.
-
The AnaSonde-1 serial transmits configuration data on power-up. SondeWorks
can receive this data and automatically adjust to an AnaSonde's
specific configuration.
-
Log files and graphs can be saved and reloaded later. Additionally,
graphs can be printed or exported to image files.
Log files and reports are tab-delimitted, and are best viewed in a
spreadsheet program.
-
SondeWorks1 integrates seamlessly with
CwGet (required).
AnaSonde models E, M and R are supported in both raw data and
plain text formats.
-
SondeWorks - Educational
(664 KB) July 23,2008
-
Sondeworks - Educational is a version of SondeWorks designed for students.
-
All AnaSonde models are supported.
-
The user interface is simpler and easier to use.
-
Balloon altitude is calculated automatically.
-
No graphic ability is provided. Students will need to generate
their own data graphs in a spreadsheet program or by hand.
-
Integrates seamlessly with
CwGet (required).
-
CwGet (off-site link)
This is the site where you can download CwGet, an exceptionally
handy and easy-to-use program which automatically decodes Morse
Code transmissions. This program can be used to decode the raw
data transmissions from Morse Code AnaSondes. This program also
seamlessly integrates with the Anasphere software for the Morse
Code AnaSondes to yield final data values.
-
AnaSonde.cwg (0.7 KB)
For plain-text Morse code AnaSondes only:
The "+" sign in Morse code (.-.-.) is the same as the prosign AR.
The default character in CWGet for this pattern is AR. If you want + to
show up in CWGet when this code is received, and you are using the
Anasphere software to display and log the data, you need to use a
user-defined character set in CWGet. You have two options to do this:
1) using a text editor, modify the sample.cwg file in the CWGet program
folder under Program Files, or 2) just copy this file,
anasonde.cwg, to the CWGet program folder (or anywhere you like).
Then select this character set in CWGet under the Setup menu, and
you're ready to go.
Tone-based Software Dowloads
